General Auto Related Help AreaGood at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Welcome to Saab Forums - Saab Enthusiast Forum
Welcome to Saab Forums - Saab Enthusiast Forum
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
just wondering where the best place to find a clutch would be. Also, what would be the best clutch for me to get...as far as bang for the buck. i drive a 94 900se 2.0t. thanks, much appreciated
Sponsored Links
Register your account for free or log in if already registered to remove this ad now!
It's about $270 for stockclutch and pressure plate, and the stage 2 with a viggen pressure plate is about $400... the prices are for eeuroparts and genuinesaab respectully.
__________________
1999 Saab 9-3 5-door Stg4
Philly Region SCCA
sorry just a couple of more questions if you will.first of all have you ordered from either of these sites and if so what do you think and how long does it usually take to recieve the part. Second, how do you feel about Sachs as a stock replacement clutch as suppose to a genuine saab? Thanks alot again
I've done buinsess with both. If you're on the east coast eeuoparts is almost always overnight (with UPS gorund), genuine saab is a lot further away so it takes 3-4 days if they havee stuff in stock. sachs is a good replacement clutch.
__________________
1999 Saab 9-3 5-door Stg4
Philly Region SCCA
Think i burned my clutch couple days ago stupidly racing with friends,the car drives, but the clutch work worse than before,thinking of replacing it. The estimate i had yesterday was 900$ ,350 labor the rest is parts.This is a little bit a lot for my budget,so the question is is it a DIY job if i get parts online and also do i have to change pressure plate and clutch disc only or replace release bearing as well?
Did anybody replaced their clutch by themselves,can you help?
It's getting warm now so you should be able to DIY this.This guy's site has loads of useful info on DIY jobs. Here's how you removethe transmission. http://photo.platonoff.com/Auto/2006...ssion_Removal/ I thing the estimate you got is a ripoff especially for a stock clutch.
__________________
1999 Saab 9-3 5-door Stg4
Philly Region SCCA