New Member AreaNew to Saab Forums.com? Stop in tell us about you.
Welcome to Saab Forums - Saab Enthusiast Forum
Welcome to Saab Forums - Saab Enthusiast Forum
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
flex plate fell apart on my 88 9000 automatic what were they thinking or smoking when they designed a flexplate to come apart cool. Anyways how do I remove the $##%^%@##^ fender trim so I can get the &%*#$@ fender liner out.? thanks :conf used::conf used:
Sponsored Links
Register your account for free or log in if already registered to remove this ad now!
Best bet is not to remove the inner liner if you can bend it out of the way enough to remove the trannie. BECAUSE the wheel well trim is held on by those 8mm nuts you see around the inside of the wheel well, They strip. Almost every time. And guess what? You cannot get the studs seperately. No, you have to buy a new wheel well trim and nuts. Besides that, they put that stupid nut on the top of the starter to be unbolted from the other side. You will see what I mean. I found the best way to get to it is with a 17mm distributor wrench, which loops around the bell housing, to break it loose then remove it the rest of the way with my fingers. Good Luck
88 9000 r r transmission
