Saab Forums - Saab Enthusiast Forum

Saab Forums - Saab Enthusiast Forum (https://saabforums.com/forum/)
-   General Auto Related Help Area (https://saabforums.com/forum/general-auto-related-help-area-8/)
-   -   clutch (https://saabforums.com/forum/general-auto-related-help-area-8/clutch-882/)

e_900se 02-22-2008 11:58 PM

clutch
 
just wondering where the best place to find a clutch would be. Also, what would be the best clutch for me to get...as far as bang for the buck. i drive a 94 900se 2.0t. thanks, much appreciated

Roto 02-23-2008 11:52 AM

RE: clutch
 
are you looking for stock or a upgrade?

e_900se 02-23-2008 11:34 PM

RE: clutch
 
i guess either, i would love to upgrade however my current budget probably will not alow me to

Roto 02-24-2008 12:42 PM

RE: clutch
 
It's about $270 for stockclutch and pressure plate, and the stage 2 with a viggen pressure plate is about $400... the prices are for eeuroparts and genuinesaab respectully.

e_900se 02-25-2008 09:53 AM

RE: clutch
 
thanks alot

e_900se 02-26-2008 10:58 PM

RE: clutch
 
sorry just a couple of more questions if you will.first of all have you ordered from either of these sites and if so what do you think and how long does it usually take to recieve the part. Second, how do you feel about Sachs as a stock replacement clutch as suppose to a genuine saab? Thanks alot again

Roto 02-27-2008 01:22 AM

RE: clutch
 
I've done buinsess with both. If you're on the east coast eeuoparts is almost always overnight (with UPS gorund), genuine saab is a lot further away so it takes 3-4 days if they havee stuff in stock. sachs is a good replacement clutch.

e_900se 02-27-2008 02:36 PM

RE: clutch
 
once again thank you very much for your valuable advice

nbsman 03-03-2008 05:01 PM

RE: clutch
 
Think i burned my clutch couple days ago stupidly racing with friends,the car drives, but the clutch work worse than before,thinking of replacing it. The estimate i had yesterday was 900$ ,350 labor the rest is parts.This is a little bit a lot for my budget,so the question is is it a DIY job if i get parts online and also do i have to change pressure plate and clutch disc only or replace release bearing as well?
Did anybody replaced their clutch by themselves,can you help?

Roto 03-03-2008 06:26 PM

RE: clutch
 
It's getting warm now so you should be able to DIY this.This guy's site has loads of useful info on DIY jobs. Here's how you removethe transmission. http://photo.platonoff.com/Auto/2006...ssion_Removal/ I thing the estimate you got is a ripoff especially for a stock clutch.


All times are GMT -5. The time now is 04:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands