Engine Management Light
 

Hi,

I have a SAAB 9-3 SE....the engine management light is on. I plugged a GenDan in and it returned the following fault codes:

P1110
P1312
P1334
P0340 - Camshaft Position Sensor A - Bank 1 Circuit Malfunction ( GenDan )

The P1312 and 1334 were previously PENDING codes but all4 are now FAULT codes....I have looked up the fault codes in the GenDan manual...but all ( apart from P0340 ) appear to be manufacturer specific, all I know is that they are all listed as Power train faults.

The car seems to drive well....no strange engine noises...is smooth, good pick-up and starts on the button...so I am hoping that it is some kind of sensor failure/mis-reporting!...

Any advice would be greatly appreciated....