PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!
Mark this thread as Unsold

1999 Saab 9-3 Stage 4 for sale.

 
Old 06-11-2009, 10:44 AM
  #1  
Super Moderator
Thread Starter
 
Join Date: Dec 2006
Location: Kiev, UA
Posts: 2,030
Default 1999 Saab 9-3 Stage 4 for sale.

Well it so happens that I'm forced to sell my car for financial reasons. Whoever ends up with it will not regret it since I was hoping to keep it for a very long time. Let me give you the rundown on it:

The good:
GenuineSaab motor and transmission mounts
GenuineSaab steering rack clamp and brace
GenuineSaab rear ARB
GenuineSaab poly bushings up front
GenuineSaab valve springs (I was going to put in cams later on this year)
GenuineSaab balance chain tensioner delete plate.
GenuineSaab 3" downpipe with a wideband bung added
GenuineSaab clear corners
Quaife LSD
Spec Stage 2 clutch and Viggen pressure plate
ARP Headstuds
Forge BOV
Koni Sport Kit
TD04 turbocharger.
Pass through intercooler (the fog lights are still there too)
The included 3" Jak Stoll exhaust isn't yet installed since I broke my foot before I ever had a chance to do it.
The engine was rebuilt when we have put in the LSD in the transmission. This was about 10K miles ago. The AC compressor, condenser and drier were replaced. The 3rd gear and sleeve were replaced along with synchronizers. The differential bearings are new since the LSD was installed.
The tires have less than 300 miles on them! Dunlop Direzza


The extras:
Jak Stoll 3" downpipe (I assume you'd put the Jak Stoll exhaust on the car since that makes sense to do)
Innovate LC1 and Lawicel CAN-USB (If you don't know this - you can pass the Wideband signal through the ECU and log everything through CAN-USB onto a laptop, or may be do what I planned to do and install a carputer. I will assist in any way I can)
GenuineSaab tie rod bushings - again never had a chance to put in due to broken foot.
The wheels are Voxx wheels that were powdercoated prismatic gold. There are sensors mounted inside for temperature and pressure and the display comes with the car, I just never gor around to installing it. All 4 center caps are missing though.


The bad:
The exterior is 10 years old. It was keyed on the passenger side and looks like it was nudged on the front right corner at some point. Never bothered me since this car was being built for one purpose - be a pleasure to drive.
The stock exhaust needs to be thrown out since it rotted. (remember that JSP exhaust that is included ) The outer tie rods probably should be replaced. Not that they're shot, but I would just do it for the sake of having new ones. It consumes some oil if you run it hard all day...with the increased boost that is actually expected.


The asking price is $4500 OBO. I need to sell it quickly since my injury incurred some bills that I need to pay. I've owned this car since 2007 and I really tried to not cut any corners in building this.

See my gallery for more pictures. The car is located in Philadelphia PA. Once the exhaust is on the car it will be a complete stage 4 car.



Last edited by Roto; 06-11-2009 at 01:22 PM.
Roto is offline  
Old 06-11-2009, 10:30 PM
  #2  
Junior Member
 
Join Date: Jun 2009
Location: Milwaukee
Posts: 2
Default dyno?

has the car been dynoed whats the break hp?
SpeedyDego is offline  
Old 06-11-2009, 10:40 PM
  #3  
Super Moderator
Thread Starter
 
Join Date: Dec 2006
Location: Kiev, UA
Posts: 2,030
Default

Hasn't been recently. Only been street tuned. There's still power to be had with a more agressive tune, I was simply adjusting it to run with the current hardware and was putting a real tune off until I get the exhaust on it so it's compete.
Roto is offline  

Thread Tools
Search this Thread

Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.