Gas Cap Vented or NON-vented??

Old Aug 8, 2008 | 07:51 PM
  #1  
whiplash's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2008
Posts: 2
Default Gas Cap Vented or NON-vented??

I found older SAAB 900 in U-pullit and the gas cap was non-vented. Will this work on a 2000 9-3? I also got the headlights and wiperset-up. Mine were broke -lights were pitted up- Junk ones looked great compared. My engine light comes on and off due to vac leak.
Old Aug 9, 2008 | 01:24 AM
  #2  
xhawksaab's Avatar
Junior Member
 
Joined: Apr 2008
Posts: 19
From:
Default RE: Gas Cap Vented or NON-vented??

The gas cap in your 2000 9-3 in NON-vented. The vac leak MAY be due to a bad gas cap seal. Are you getting code P0455? The other possibilities are bad vacuum hoses and a malfunctioning EVAP purge valve.
Old Aug 9, 2008 | 07:29 PM
  #3  
whiplash's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2008
Posts: 2
Default RE: Gas Cap Vented or NON-vented??

Thanks. I have replaced cap but light stays on. I will have to get code read again..
Old Aug 9, 2008 | 09:32 PM
  #4  
Roto's Avatar
Super Moderator
 
Joined: Dec 2006
Posts: 2,030
From: Kiev, UA
Default RE: Gas Cap Vented or NON-vented??

try resetting the ecu first...pull the negative battery cable off for a few minutes. See if CEL reappears.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:32 AM.